- 备盈倍BS&B防爆**系统
- 贺尔碧格Newson Gale防爆静...
- 贺尔碧格hoerbiger防爆**系...
- 意大利Aircom爱科粉尘隔爆阀/泄...
- 法国Stif斯缇福防爆板/无焰阻火器...
- 西班牙Adix安迪克斯隔爆阀/抑制系...
- 瑞士Rico瑞科爆炸隔离阀/抑爆系统...
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除尘和防爆产品
- 美国Argus火花和金属探测以及回收...
- 美国Edwards爱德华消防报警系统
- 美国Kidde凯德厨房灭火和空气采样...
- 美国Marioff HI-FOG高压...
- 挪威纳斯克激光气体分析仪
- 德国Rembe认必泄压爆破片及隔离尘...
- 英国Amal阻火器
- 英国Marvac呼吸阀和紧急泄放阀以...
- 英国Marston防爆板和爆破片
- 美国ZOOK防爆板
- 瑞士Rico-Ventex隔爆阀
- 德国GreCon格雷康火花探测器以及...
- 德国Eltex埃尔特克斯防爆静电接地...
- 美国迪康气体检测设备
- 美国PAC实验室和在线分析仪器
- 奥德姆/安姆特仪器产品
- 美盛环境监测行业成套系统工程
- 美盛流体污染控制,过滤,分离净化产品
- 美国Norman不锈钢高压过滤器
- 美国施罗德过滤器以及过滤系统
- 韩国杜科给水设备以及泵系统
- 美国Cameron卡麦龙过程控制和阀...
- 美国BARTON测量仪器仪表
- 美国NUFLO仪表产品
- 美国clif mock采样设备和系统
- Caldon超声波技术产品
- 美国Cameron/Barton卡麦...
- 美国Pentail滨特尔油液净化设备...
- 韩国雷尊泰克REZONTECH火焰探...
- 韩国CSA Bestouch火焰探测...
- 科马特泰克色谱技术产品
- 英国爱丁堡Edinburgh ins...
- 欧美Cerex/AquaRead等进...
- 欧文凯利自控阀设备
- 德尔格Draeger**检测设备
- 美国Det-tronics火焰探测器...
- 泵阀控制
- 美国Honeywell生命**产品
- 密析尔湿度和露点仪表
- 美国TIF公司卤素检漏仪
- 美国Teledyne Analyti...
- 美国泰科SCOTT健康和**
- 日本日置HIOKI电测产品
- 英国梅克罗尼(MICRONICS)超...
- 美国AII氧分析仪
- 美国Raytek红外测温仪
- 美国Fike火灾,爆炸和卸压产品
- 美国Curtiss-Wright F...
- 美国Badger Meter 流体测...
- 美国Barton/Prime差压单元...
产品详情
简单介绍:
8800 - Trace Moisture Analysis Instrumentation微量水分析仪
teledyne公司成功的将超薄膜镀层的**技术应用到8800传感器研发上,改变了AL2O3镀层的3个主要指标.这些结构的改变,是露点传感器的各项技术指标有了****的提高:灵敏度增加,稳定性提高,响应时间缩短.8800系列可以测量-100-20摄氏度的露点.有4款基本产品.
详情介绍:
8800 - Trace Moisture Analysis Instrumentation微量水分析仪
teledyne公司成功的将超薄膜镀层的**技术应用到8800传感器研发上,改变了AL2O3镀层的3个主要指标.这些结构的改变,是露点传感器的各项技术指标有了****的提高:灵敏度增加,稳定性提高,响应时间缩短.8800系列可以测量-100-20摄氏度的露点.有4款基本产品.
8800A:面板式安装外壳;8800B:壁挂式安装外壳
8800P:便携式电池供电分析仪;8800T:直流供电变送器型;
teledyne公司成功的将超薄膜镀层的**技术应用到8800传感器研发上,改变了AL2O3镀层的3个主要指标.这些结构的改变,是露点传感器的各项技术指标有了****的提高:灵敏度增加,稳定性提高,响应时间缩短.8800系列可以测量-100-20摄氏度的露点.有4款基本产品.
8800A:面板式安装外壳;8800B:壁挂式安装外壳
8800P:便携式电池供电分析仪;8800T:直流供电变送器型;
Utilizing an Aluminum Oxide sensor 600 times more sensitive than conventional sensors The 8800 series uses field proven aluminum oxide (Al2O3) sensing technology to accurately detect trace moisture on either a continuous or spot checking basis. All Al2O3 sensors share the same basic operating principle: the capacitance measured between the sensor's aluminum core and gold film deposited on the oxide layer varies with the water content. However, the Series 8800 moisture sensor employs unique Hyper Thin Film (HTF) technology, which offers three major structural improvements in Al2O3 sensor design. - Dew-point conversion calculator Versatile Design Options The Series 8800 Single Point Trace Moisture Analyzers are provided in four compact, reliable designs with the ability to detect moisture from -100°C to ambient dewpoint levels of +20°C on either a continuous or spot checking basis. - 8800A – Flush Mount DIN enclosure with connections made via a pluggable screw terminal block - 8800B – Wall Mount N4X (IP65) enclosure with connections made 3 bottom watertight fittings - 8800P – Portable battery operated design available in the Standard Version, I/O Version, and I/S Version (I/S version suitable for hazardous areas) - 8800T – Low-cost, loop powered 4-20mA transmitter design with built-in LCD display Common Electronics Platform The Series 8800 electronics feature a custom LCD 3.5 digit display with backlight capabilities (backlight not available on 8800T). Each controller is operated through a menu-driven user interface. The push buttons or keys have a tactile feel, and to provide additional feedback to the user they also produce a beep when depressed. Each unit uses a state of the art microprocessor offering advanced intelligent features. In general, the MODE button navigates through the different user options; the UP and DOWN buttons modify the units, values, or choices in the selected mode; and the Pressure Correct button is used to either abort out of a mode or to activate the pressure correction function of the instrument. The user can select the moisture analysis readout to be displayed as Deg C, Deg F, ppm and for natural gas applications in lbs of H2O/ million cft or g/m3. Most versions offer the common options of two adjustable alarms, an isolated 0-24mA or 4-20mA output or RS-232C serial interface The instrument also has an indication for sensor open, short or electronic system failure to quickly alert the operator to a possible malfunction situation. In addition, most versions offer extensive self-diagnostic features that are performed at both start-up as well as once every two minutes. Pressure Correction Function The moisture readings are typically displayed at sensor pressure (atmospheric). Alternatively, the operator can display the readings at the line pressure by selecting and setting the Pressure Correct Mode key. Readings are typically read on a dewpoint basis in Deg C or Deg F. For readout on a ppm basis, the operator must control / know the line pressure and program this value into the controller via the pressure correct function. Sensor Installation Considerations Proper sample handling is crucial to maintaining the tight moisture control demanded by the industry today. Operators can assist in achieving a successful dew point measurement by • Mounting the sensor as close to the measurement point as possible • Mounting the instrument as close to the measurement point as practical Relevant Application Bulletins - Hydrocarbon processing application: Platformer Recycle Gas moisture measurement - 8800UOP |