产品详情
  • 产品名称:WHEATLEY® Check Valves止回阀

  • 产品型号:
  • 产品厂商:其它品牌
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
WHEATLEY® Check Valves止回阀 WHEATLEY® Check Valves止回阀由美盛科技中国有限公司供应 WHEATLEY® Check Valves止回阀自 1916 年以来是在流量控制行业的***。正文设计*大流量区压力损失减到*小和*大程度减少安装空间和时间。
详情介绍:
WHEATLEY® Check Valves止回阀
WHEATLEY® Check Valves止回阀由美盛科技中国有限公司供应
WHEATLEY® Check Valves止回阀自 1916 年以来是在流量控制行业的***。正文设计*大流量区压力损失减到*小和*大程度减少安装空间和时间

WHEATLEY® Check Valves止回阀
WHEATLEY® Check Valves止回阀由美盛科技中国有限公司供应
WHEATLEY® Check Valves止回阀自 1916 年以来是在流量控制行业的***。正文设计*大流量区压力损失减到*小和*大程度减少安装空间和时间



















Valves -   WHEATLEY Dual Plate Wafer Check Valve


WHEATLEY Dual Plate Wafer Check Valve


















设计特点
惠特利的车身设计提供了以下功能:

• 紧凑晶圆一体式的设计风格
• 中心职位完全支持没有外部的内部程序集
针脚或插头
• 由于惠特利,确保无渗漏到 atmoshere 的标准
它消除了通过孔和管道的设计插头在正文中
• *大流通面积减到*小的压力损失
• *大程度减少安装空间和时间

双板设计生产*大强度的*低开启和关闭时间

夹紧板提供额外的阀板的强度和允许密封件可以方便地更改
专门设计的平面、 完整的联系密封件保持积极关闭在低工作压力。与大多数其他阀门,不同的是这些封印很容易被取代在字段中

扭转弹簧协助防止流逆转的阀板封闭。一致阀门的反应可确保针对砰和水击

重型耐腐蚀建设轴

轴支持作为停止以防止阀板的旅行。耐腐蚀与大轴轴承表面。轻松地可移动内部装配、 维修或更改


Valves -   TOM WHEATLEY Piston Check Valves






















Standard Features
• Size range: 2 in.  through 12 in.
ANSI Classes:150 - 1500
Full open / top mounted piston check valve  
Controlled clapper movement on full opening piston check valves
 
Horizontal or Vertical service
Metal-to-Metal seats
Quick opening of piston
RF or RTJ end connections

Optional Features
• Integral or removable seat
Metal overlays

Body Construction
Carbon Steel Body, Cover and Trim.



Valves -   WHEATLEY Short Pattern Wafer Check Valve

WHEATLEY Short pattern Wafer Check Valve















Inexpensive Reduced Port Check Valves are used in applications where...
 • Media is clean (abrasives are not present)
 • Flow is steady and not pulsating
 • Flow rates are low
 • Pigs or spheres are not intended to run through the valve
 • Velocity through the seat does not exceed:
   Liquids 15 feet per second
   Gases 100 feet per second


Valves -   WHEATLEY Series 500 Fire Tested Carbon Steel Flanged End Check Valve


WHEATLEY Series 500 Check Valve




















API 6D/Drilling production valve carbon steel flanged end check valves 

When you need a check valve that has to work!

Features:
• 316 stainless steel trim is compatible with a broad range of
  media and
operating conditions
• Full-Open, through-conduit design for low pressure drop and
  less turbulence.
Valves easily pass pigs and spheres
• 90 Durometer, peroxide-cured seals are compatible with a
  broad range of
media and operating conditions. Seals provide
  a bubble-tight shut-off
every time
• Suitable for vertical flow up or horizontal installation.
  Eliminates
installation guesswork
• All materials conform to NACE MR0175 / ISO 15156
• Cast on flanges provide greater valve body integrity and
  fewer leak points
• API 6D Monogram (510 / 511 Only)



API 6D/Drilling production valve carbon steel flanged end check valves 

When you need a check valve that has to work!

Features:
• 316 stainless steel trim is compatible with a broad range of
  media and
operating conditions
• Full-Open, through-conduit design for low pressure drop and
  less turbulence.
Valves easily pass pigs and spheres
• 90 Durometer, peroxide-cured seals are compatible with a
  broad range of
media and operating conditions. Seals provide
  a bubble-tight shut-off
every time
• Suitable for vertical flow up or horizontal installation.
  Eliminates
installation guesswork
• All materials conform to NACE MR0175 / ISO 15156
• Cast on flanges provide greater valve body integrity and
  fewer leak points
• API 6D Monogram (510 / 511 Only)

   WHEATLEY Series 500 Check Valve
• Designed in accordance with ASME B16.34 (510 / 511 Only)
• Valve is fire tested to API 6FD
requirements (except for 1 in. (25 mm) valve)
• CANADIAN REGISTRATION NUMBER
(CRN) available upon request
• Flanges are back-faced - an extra
manufacturing step which provides smoother bolting surfaces and
  even
bolt  loading
• Bolted top entry complete with 1/2 in.
NPT cover tap for gauges and accessories (except 1 in. (25 mm) size)
• In-line repairable
• Thru-pin clapper shaft makes clapper
removal easier and extends valve life by transferring wear and tear to
  an
inexpensive replaceable part.


 


Valves -   WHEATLEY Series 822 Check Valve

WHEATLEY Series 500 Check Valve


















WHEATLEY® Series 822 Check Valves

When you need a check valve that has to work!

Features:
• Designed in Accordance with ASME B16.34 (WCC, LCC and
  CF8M only)
• Material of construction conform to NACE MR0175 / ISO 15156 
• Solid 316 stainless steel clapper and hanger which eliminates the
  need for seperate pins, bushings and rollers
 
• Compact valve geometry minimizes weight and space
• Bevelled, self-aligning clapper and seat design incorporates
  a molded seal in the clapper for a bubble-tight primary and
  metal-to-metal secondary seal
• Peroxide-cured Buna-N (FKM & HNBR optional) Seals
• Generous wrench area on body and hex-head threaded cover for
  easier installation and maintenance
• Full opening
• Suitable for horizontal or vertical flow up
• Below-the-threads cover seal isolates the cover threads from 
  line media
• Metal Nameplate
 


* 请输入您的名字,方便我们和您联系
* 请输入您的电话,方便客服及时解答您的问题
* 请输入您详情地址,方便详细提供当地的市场讯息