
- 比利时StuvEX防爆与防火设备
- 美国RCS腐蚀产品监测设备
- 卢森堡ROTAREX罗达莱克斯灭火系...
- 意大利GM SISTEMI火花探测及...
- 西班牙ADIX安迪克斯抑制爆炸系统
- 备盈倍BS&B防爆**系统
- 贺尔碧格Newson Gale防爆静...
- 贺尔碧格hoerbiger防爆**系...
- 意大利Aircom爱科粉尘防爆设备
- 法国Stif斯缇福粉尘防爆设备
- 西班牙Adix安迪克斯隔爆阀抑制系统...
- 瑞士Rico瑞科爆炸隔离阀
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除尘和防爆产品
- 美国Argus火花和金属探测以及回收...
- 美国Edwards爱德华消防报警系统
- 美国Kidde凯德厨房灭火和空气采样...
- 美国Marioff HI-FOG高压...
- 挪威纳斯克激光气体分析仪
- 德国Rembe认必泄压爆破片及隔离尘...
- 英国Amal阻火器
- 英国Marvac呼吸阀和紧急泄放阀以...
- 英国Marston防爆板和爆破片
- 美国ZOOK防爆板
- 瑞士Rico-Ventex隔爆阀
- 德国GreCon格雷康火花探测器以及...
- 德国Eltex埃尔特克斯防爆静电接地...
- 美国迪康气体检测设备
- 美国PAC实验室和在线分析仪器
- 奥德姆/安姆特仪器产品
- 美盛环境监测行业成套系统工程
- 美盛流体污染控制,过滤,分离净化产品
- 美国Norman不锈钢高压过滤器
- 美国施罗德过滤器以及过滤系统
- 韩国杜科给水设备以及泵系统
- 美国Cameron卡麦龙过程控制和阀...
- 美国BARTON测量仪器仪表
- 美国NUFLO仪表产品
- 美国clif mock采样设备和系统
- Caldon超声波技术产品
- 美国Cameron/Barton卡麦...
- 美国Pentail滨特尔油液净化设备...
- 韩国雷尊泰克REZONTECH火焰探...
- 韩国CSA Bestouch火焰探测...
- 科马特泰克色谱技术产品
- 英国爱丁堡Edinburgh ins...
- 欧美Cerex/AquaRead等进...
- 欧文凯利自控阀设备
- 德尔格Draeger**检测设备
- 美国Det-tronics火焰探测器...
- 泵阀控制
- 美国Honeywell生命**产品
- 密析尔湿度和露点仪表
- 美国TIF公司卤素检漏仪
- 美国Teledyne Analyti...
- 美国泰科SCOTT健康和**
- 日本日置HIOKI电测产品
- 英国梅克罗尼(MICRONICS)超...
- 美国AII氧分析仪
MultiTox DM–TT6 (MOS)电化学有毒气体探测仪,这个高规格 H2S 检测器使用半导体传感器,克服了大部分的这种技术与相关的问题。MultiTox DM TT6 拥有更高的可靠性和低维修。换句话说: 增加**性和降低了成本。

特性:
- Mixed MOS sensor
- Built-in temperature and humidity compensation
- Does not drift or fall asleep
- Maintenance reduced, annual calibration“No-touch”field cabling
- Wireless, certified configuration tool
- Configuration and maintenance by a single technician
- Available in aluminium only
- HART (R) option
This high-spec H2S detector uses a semiconductor sensor that overcomes most of the problems associated with this technology. The MultiTox DM-TT6 has higher reliability and lower maintenance. In other words: Increased safety and reduced cost.
The DM-TT6 is a solid-state metal oxide semiconductor (MOS) gas detector used mainly for the detection of hydrogen sulphide in arid locations having air present. The DM-TT6 can also be configured for other gases, such as refrigerants (e.g. R22).
The unit employs a robust sensing element that needs recalibration just once a year. In addition the device does not need a high gas concentration dose to reactive the active sensing material.
The intelligent, microprocessor driven unit is fully configurable using a wireless handheld terminal (TLU) giving true flexibility to the installer. Elements such as relay operation and alarm levels are all set via the TLU, hazardous area approved handheld unit.
The device offers a wide range of output options as standard and is suitable for use in SIL 2 applications. The unit may be interfaced directly with a wide range of panels, controllers and PLC’s etc.
The may be used in refineries, offshore driling and production platforms, processing and storage plants as well as chemical plants.
技术参数:
GENERAL | |
Type | Gas detector |
Product | Simtronics MultiTox, H2S (MOS) |
Product code | DM-TT6-31** |
Manufacturer | Simtronics |
GAS DETECTOR | |
Type | Solid state metal oxide semiconductor (MOS) |
Detected gas | Hydrogen Sulphide (H2S) |
Calibrated range | 50ppm, 100ppm |
PERFORMANCE | |
Accuracy | ±10% of calibrated range |
Repeatibility | ±2% |
Stability | ±2% (zero point) |
Response time | T50: <30 sec, T90: <120 sec |
Calibration interval | 12 months |
Sensor life | Better than 5 years |
ELECTRICAL | |
Power supply | 24V DC, range (18 - 32V DC) |
Power consumption | 65 mA normal |
Cable entry | 2x M20, one entry with Exd plug |
Junction box | “No-touch” field cabling”, detector replaceable without opening cable glands |
Connection | 0.3 mm2 (22 AWG) - 1.5 mm2 (16 AWG), 3 or 4 wires |
Analogue output signal | 0-20mA, source, max. load impedance 700Ω. |
Fault signalling | Diagnosis signalling in the 2.0 - 3.4mA range |
Relays | 2 individual configurable relays for alarm and fault |
Maintenance interface | Wireless (IR) handheld terminal for configuration, test and diagnosis |
ENVIRONMENT | |
Storage | -40°C to +70°C (-40°F to 158°F) |
Operation | -20°C to +60°C (-4°F to 140°F) |
Humidity | 95% RH (non-condensing) |
Ingress | IP66 |
RFI/EMI | Complies with EN50081-1, EN50081-2, EN50082-1 and EN50082-2. |
HOUSING | |
Ex Classification | Ex d II C T6 |
Material | Epoxy coated aluminium or Stainless steel (Specify variant) |
Weight | Aluminium: 1.8 Kg (4.0 lbs) Stainless steel: 6.5 Kg (14.3 lbs) |
Dimensions | 165H x 118D x 184W (mm), 6.50H x 4.65D x 7.25W (inches) |
APPROVALS | |
ATEX | Certificate DM LCIE 03 ATEX 6263 |
IECEx | Certificate DM IECEx LCI09.0018 |
ACCESSORIES | |
TLU600 | Infrared remote control unit |
AS008-200 | Sunshade |
AS005 | Calibration cup |
AS011-2-X | Sample flow housing |
AS019 | Splash guard |
文档:
Product Sheet MultiTox DM TT6453.56 KB
Operating Manual MultiTox Detector2.13 MB
Operating Manual Remote Controller TLU 600/6102.93 MB
证书:
ATEX Certification402.79 KB
应用:
- Refineries
- Offshore Drilling and Production Platforms
- Chemical Plants
- Processing and Storage Plants