产品详情
查看大图

  • 产品名称：Specialty Products

  • 产品型号：Specialty Products
  • 产品厂商：其它品牌
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
Specialty Products 1,P-Trim Multi-Stage Plug Throttling 2,Synflow Sweep Angle Valves for Synfuel Service 3,Noise Reduction Devices for Systematic Noise Control
详情介绍：
Specialty Products
1,P-Trim Multi-Stage Plug Throttling
2,Synflow Sweep Angle Valves for Synfuel Service
3,Noise Reduction Devices for Systematic Noise Control

Specialty Products

P-Trim Multi-Stage Plug Throttling

To prevent cavitation and subsequent damage in ultra high pressure letdown service, P-Trim valves employ three techniques:

A unique plug/chamber design sharply reduces and controls, velocity and
pressure drops at any point in the valve interior.
Material selection is limited to proven alloys that have demonstrated high 
erosion resistance and good wear characteristics after years in service.
The industry's highest standards of precision machining, finish quality and 
overall quality assurance are met or exceeded.

The multi-keyed plug and throttling orifice chamber in Mark P Trim valves uses two to seven stages to reduce the pressure gradually instead of handling an ultra-high pressure drop in a single stage. By accurately controlling the pressure drop in each stage to 700 psi or less, velocities are reduced and cavitation noise and vibration are prevented.

The slightest casting imperfections can lead to premature valve failure, so Leslie precision machines all internal throttling surfaces assuring actual trim conforms to theoretical design values.

P-Trim valves are available in 2" to 6" sizes for throttling drops to 5000 psi and body ratings to ANSI Class 3500.

Synflow Sweep Angle Valves for Synfuel Service

The Leslie Synflow Valve has been especially designed for the most difficult applications in synthetic fuel, refining, petrochemical and oil & gas industries. This type of sweep angle design has been applied successfully in:
Slurry letdown
Visbreaker
Hot separator letdown
Well choke production
H-Oil letdown

Slurry letdown service is the most critical of these applications, involving three-phase flow of solids, liquids and gases at extremely high temperatures and pressure drops that can destroy a conventional valve in a matter of hours.

The Synflow Valve has been used successfully in a number of synfuel pilot plant situations where its actual service life has exceeded that of other valves by several orders of magnitude.

Ccritical body passages of the Synflow are designed to keep wear to a minimum. Plugs and seats are a special tungsten-carbide alloy for corrosion and abrasion resistance. To facilitate maintenance and inspection, all internal parts (except the seat ring) are easily removable from the top of the valve. In the bonnet closure, all boltings and gaskets are designed to eliminate problems inherent in thermal transients. 

Noise Reduction Devices for Systematic Noise Control

An economical way to reduce control valve or reducing valve noise by 6 to 12 dBA is to install the Les-Sonic Silencing Orifice downstream from the valve between two flanges. A Leslie Noise Suppressor installed at the valve outlet, will reduce pipeline carried noise by 10 to 20 dBA. For maximum reduction of pipeline transmitted noise, the conbined installation of a Les-Sonic Silencing Orifice and a Noise Suppressor will reduce the sound pressure level by 16 to 32 dBA.
* 请输入您的名字，方便我们和您联系
* 请输入您的电话，方便客服及时解答您的问题
* 请输入您详情地址，方便详细提供当地的市场讯息