- 备盈倍BS&B防爆**系统
- 贺尔碧格Newson Gale防爆静...
- 贺尔碧格hoerbiger防爆**系...
- 意大利Aircom爱科粉尘隔爆阀/泄...
- 法国Stif斯缇福防爆板/无焰阻火器...
- 西班牙Adix安迪克斯隔爆阀/抑制系...
- 瑞士Rico瑞科爆炸隔离阀/抑爆系统...
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除尘和防爆产品
- 美国Argus火花和金属探测以及回收...
- 美国Edwards爱德华消防报警系统
- 美国Kidde凯德厨房灭火和空气采样...
- 美国Marioff HI-FOG高压...
- 挪威纳斯克激光气体分析仪
- 德国Rembe认必泄压爆破片及隔离尘...
- 英国Amal阻火器
- 英国Marvac呼吸阀和紧急泄放阀以...
- 英国Marston防爆板和爆破片
- 美国ZOOK防爆板
- 瑞士Rico-Ventex隔爆阀
- 德国GreCon格雷康火花探测器以及...
- 德国Eltex埃尔特克斯防爆静电接地...
- 美国迪康气体检测设备
- 美国PAC实验室和在线分析仪器
- 奥德姆/安姆特仪器产品
- 美盛环境监测行业成套系统工程
- 美盛流体污染控制,过滤,分离净化产品
- 美国Norman不锈钢高压过滤器
- 美国施罗德过滤器以及过滤系统
- 韩国杜科给水设备以及泵系统
- 美国Cameron卡麦龙过程控制和阀...
- 美国BARTON测量仪器仪表
- 美国NUFLO仪表产品
- 美国clif mock采样设备和系统
- Caldon超声波技术产品
- 美国Cameron/Barton卡麦...
- 美国Pentail滨特尔油液净化设备...
- 韩国雷尊泰克REZONTECH火焰探...
- 韩国CSA Bestouch火焰探测...
- 科马特泰克色谱技术产品
- 英国爱丁堡Edinburgh ins...
- 欧美Cerex/AquaRead等进...
- 欧文凯利自控阀设备
- 德尔格Draeger**检测设备
- 美国Det-tronics火焰探测器...
- 泵阀控制
- 美国Honeywell生命**产品
- 密析尔湿度和露点仪表
- 美国TIF公司卤素检漏仪
- 美国Teledyne Analyti...
- 美国泰科SCOTT健康和**
- 日本日置HIOKI电测产品
- 英国梅克罗尼(MICRONICS)超...
- 美国AII氧分析仪
- 美国Raytek红外测温仪
- 美国Fike火灾,爆炸和卸压产品
- 美国Curtiss-Wright F...
- 美国Badger Meter 流体测...
- 美国Barton/Prime差压单元...
产品详情
简单介绍:
Panterra Sensor
Panterra是支持多种化学品和技术的一系列检测智能气体探测器。
产品家族的成员按传感器类型是有区别的,选择根据使用要求和目标类型的传感环境而定(如湿度条件下厌氧和零)。
详情介绍:
Panterra Sensor
Panterra是支持多种化学品和技术的一系列检测智能气体探测器。
产品家族的成员按传感器类型是有区别的,选择根据使用要求和目标类型的传感环境而定(如湿度条件下厌氧和零)。
Supported sensor types include thermal conductivity, metal-oxide semiconductor (MOS), electrochemical, catalytic (pellistor), and acoustic devices.
The detectors are offered as self-contained units or with extendable sensing heads.
Power consumption varies according to sensor type from 100mW to 1W. Input powering options are 5VDC (regulated) or 7-40VDC / 7-60VDC (unregulated).
Specification Information
Panterra是支持多种化学品和技术的一系列检测智能气体探测器。
产品家族的成员按传感器类型是有区别的,选择根据使用要求和目标类型的传感环境而定(如湿度条件下厌氧和零)。
Supported sensor types include thermal conductivity, metal-oxide semiconductor (MOS), electrochemical, catalytic (pellistor), and acoustic devices.
The detectors are offered as self-contained units or with extendable sensing heads.
Power consumption varies according to sensor type from 100mW to 1W. Input powering options are 5VDC (regulated) or 7-40VDC / 7-60VDC (unregulated).
Specification Information
- One common interface for several sensor/gas types
- 10-bit auto-ranging sensor sampling system
- Normal, Warning, Alarm & Error states
- Bi-color LED status indicator
- Optional NO or NC dry relay
- Auto-resetting or latching operation
- Optional 0-to-5V proportional output (10 bits)
- Optional binary operation (TTL output)
- Optional voltage encoded state output (analog)
- Optional alarm beeper
- PK-Port™ compatible digital communications
- User-settable alarm/warning via PK-Port™
- Digital FLASH-based calibration
- Each device factory pre-calibrated
- Field re-programmable firmware
- Active temperature compensation (as required)
- Sensor & temperature error detection
- Optional extendable sensor head
- 5VDC, 7-40VDC or 7-60VDC input power
- 500 mW operating power (typical)
Action Level Options:
Alarm level specified as "PN-Sx-Gyy-Annn", where:
"x" is the sensor type code (EG "ST" denotes thermal conductivity)
"yy" is the target gas code (EG "GOX" implies oxygen)
"nnn" is alarm level (% of sensing range)
Warning level specified as "Wpp" where "pp" is percentage of sensing range
Error Handling Options:
1. Audio-visual indication of errors [E1]
2. Errors trigger alarms (fail safe) [E2]<!--[endif]-->
Alarm level specified as "PN-Sx-Gyy-Annn", where:
"x" is the sensor type code (EG "ST" denotes thermal conductivity)
"yy" is the target gas code (EG "GOX" implies oxygen)
"nnn" is alarm level (% of sensing range)
Warning level specified as "Wpp" where "pp" is percentage of sensing range
Error Handling Options:
1. Audio-visual indication of errors [E1]
2. Errors trigger alarms (fail safe) [E2]<!--[endif]-->
Overdose Handling Options:
(Applies to MOS hydrogen sensor only)
1. Failure to hypersensitivity [X1]
2. Failure to persistent error state [X2]
Output Signal Option:
1. TTL - Norm.-high, Auto (self-clearing) [O1]
2. TTL - Norm.-low, Auto (self-clearing) [O2]
3. TTL - Norm.-high, Latch (Button reset) [O3]
4. TTL - Norm.-low, Latch (Button reset) [O4]
5. Proportional output - 0 to 5VDC [O5]
0.5V safety offset (zero reading)
1000 steps of 4.9mV each
Each step equals one resolution unit
6. State step - 0 to 5VDC [O6]
Relay Options
1. Relay not required [R0]
2. Normally-closed, Auto (self-clearing) [R1]
3. Normally-open, Auto (self-clearing) [R2]
4. Normally-closed, Latch (Button reset) [R3]
5. Normally-open, Latch (Button reset) [R4]
Specify relay to respond to warning state, alarm state, or both.
<!--[endif]-->
(Applies to MOS hydrogen sensor only)
1. Failure to hypersensitivity [X1]
2. Failure to persistent error state [X2]
Output Signal Option:
1. TTL - Norm.-high, Auto (self-clearing) [O1]
2. TTL - Norm.-low, Auto (self-clearing) [O2]
3. TTL - Norm.-high, Latch (Button reset) [O3]
4. TTL - Norm.-low, Latch (Button reset) [O4]
5. Proportional output - 0 to 5VDC [O5]
0.5V safety offset (zero reading)
1000 steps of 4.9mV each
Each step equals one resolution unit
6. State step - 0 to 5VDC [O6]
Relay Options
1. Relay not required [R0]
2. Normally-closed, Auto (self-clearing) [R1]
3. Normally-open, Auto (self-clearing) [R2]
4. Normally-closed, Latch (Button reset) [R3]
5. Normally-open, Latch (Button reset) [R4]
Specify relay to respond to warning state, alarm state, or both.
<!--[endif]-->
Audio Sounder Options
1. No beeper [S0]
2. Included beeper [S1]
Enclosure Options
1. Open-frame (Circuit board only) [P0]
2. Anodized aluminum case (No flange) [P1]
3. Anodized aluminum case (With flange) [P2]
Sensor Placement Options
Sensor heads can be housed within the control unit or can be extended via a cable. Extended sensors are house in a flanged aluminum enclosure.
1. No sensor extension [L0]
2. Sensor extended "n" meters [Ln]
Powering Options
1. 5 VDC (+/- 5%) [I1]
2. 7-to-40 VDC switch mode PSU [I2]
3. 7-to-60 VDC switch mode PSU [I3]
Accessories
H-Tech Shipping Information
Estimated Ship Dimensions: " x " x "
• Estimated Ship Weight: lbs
• Lead time: 14 days
• Shipping origin: Vancouver, Canada
Please contact us for pricing on this product.
H-Tech's Shipping Policy
1. No beeper [S0]
2. Included beeper [S1]
Enclosure Options
1. Open-frame (Circuit board only) [P0]
2. Anodized aluminum case (No flange) [P1]
3. Anodized aluminum case (With flange) [P2]
Sensor Placement Options
Sensor heads can be housed within the control unit or can be extended via a cable. Extended sensors are house in a flanged aluminum enclosure.
1. No sensor extension [L0]
2. Sensor extended "n" meters [Ln]
Powering Options
1. 5 VDC (+/- 5%) [I1]
2. 7-to-40 VDC switch mode PSU [I2]
3. 7-to-60 VDC switch mode PSU [I3]
Accessories
Evaluation kit
|
KnowzNet™
|
|
H-Tech Shipping Information
Estimated Ship Dimensions: " x " x "
• Estimated Ship Weight: lbs
• Lead time: 14 days
• Shipping origin: Vancouver, Canada
Please contact us for pricing on this product.
H-Tech's Shipping Policy