产品详情
  • 产品名称:W High Pressure & Flow

  • 产品型号:W High Pressure & Flow
  • 产品厂商:其它品牌
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
W High Pressure & Flow 标准材料:接液部分 - 316不锈钢,柱塞 - 316不锈钢,控制器 - 旺角- X的 - 316不锈钢,继电器 - 316不锈钢,密封材料:聚四氟乙烯石墨为1000至10000压力(Tg)的PSIG,O型密封圈可用于各种材料的900 PSIG中,钾的Kalrez,V型氟橡胶和BR -丁腈橡胶,电子顺磁共振,乙烯丙烯压力
详情介绍:
W High Pressure & Flow
W High Pressure & Flow
标准材料:接液部分 - 316不锈钢,柱塞 - 316不锈钢,控制器 - 旺角- X的 - 316不锈钢,继电器 - 316不锈钢,密封材料:聚四氟乙烯石墨为1000至10000压力(Tg)的PSIG,O型密封圈可用于各种材料的900 PSIG中,钾的Kalrez,V型氟橡胶和BR -丁腈橡胶,电子顺磁共振,乙烯丙烯压力

W Hi Pressure-Flow Plunger

Features

 


wcross
 

STANDARD MATERIALS:
  • Wetted parts - 316 SS
  • Plunger - 316 SS
  • Controller - MK-X - 316 SS
  • Relays - 316 SS

SEAL MATERIALS:
  • Teflon Graphite (TG) for pressures of 1000 to 10,000 PSIG
  • O-Ring seals are available for pressures below 900 PSIG in various materials, K-Kalrez®, V-Viton® and BR-Buna N, EPR-Ethylene Propylene.

VISCOSITY:
  • Maximum recommended viscosity 4500 SSU (Saybolt Seconds Universal) or 960 CP (Centipoise).

W Hi Pressure-Flow Plunger

Operation


POWER STROKE:
As the supply air/gas from the CONTROLLER-RELAY enters the PNEUMATIC DRIVE CYLINDER thru the POWER STROKE PORT, the PISTON-PLUNGER ASSEMBLY is driven down into the FLUID CYLINDER, displacing fluid. The fluid displacement results in an increase in pressure which closes the SUCTION CHECK VALVE and opens the DISCHARGE CHECK VALVE. A precise amount of fluid, corresponding to the stroke of the plunger, is discharged.

SUCTION STROKE:
When the air/gas is exhausted from the top portion of the PNEUMATIC DRIVE CYLINDER through the CONTROLLER-RELAY, air/gas is then supplied to the bottom portion of the PNEUMATIC DRIVE CYLINDER in order to return the PISTON-PLUNGER to its original position. The drop in pressure caused by the retraction of the PISTON-PLUNGER assembly allows the DISCHARGE CHECK VALVE to close, and the SUCTION CHECK VALVE to open. The FLUID CHAMBER is then refilled and ready for the POWER STROKE.
* 请输入您的名字,方便我们和您联系
* 请输入您的电话,方便客服及时解答您的问题
* 请输入您详情地址,方便详细提供当地的市场讯息