产品详情
  • 产品名称:FIR Series 光抽运的激光器

  • 产品型号:
  • 产品厂商:其它品牌
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
FIR Series 光抽运的激光器 FIR Series 光抽运的激光器由美盛科技中国有限公司供应 光抽运、 远红外线 (FIR) 激光器的可供需要相干辐射光谱范围内的 40 微米至 1.22 毫米,太赫兹 (0.25 至 7.5 太赫兹) 的频率范围的应用程序。
详情介绍:
FIR Series 光抽运的激光器
FIR Series 光抽运的激光器由美盛科技中国有限公司供应



光抽运、 远红外线 (FIR) 激光器的可供需要相干辐射光谱范围内的 40 微米至 1.22 毫米,太赫兹 (0.25 至 7.5 太赫兹) 的频率范围的应用程序。

冷杉激光频率产生极性气体分子在低气压兴奋的振动状态中的旋转转换。光泵远红外激光依赖于可调谐红外辐射来创建旋转国家之间的人口反演和因此产生激光行动的选择性吸收。在实践中,少数分子的选择可以跨整个 FIR 频谱从 40 μ m 向上提供离散频率

取决于使用的爱丁堡仪器 CO2 泵激光型号可以保证输出 150mW 和 118.8 μ m 和 184.3 微米甲醇 (ch3oh,通常) 线在 500mW 的权力。

冷杉激光器是英华栏企稳和可用的单个或双重输出。产品范围从杉木 295,冷杉 395 (双人 FIR 输出),向大家闺秀 100

电源
常规高压直流励磁用于激发激光放电。每个激光由 LPS 系列中的一新的契约 (19"机架安装) 驱动的开关模式电源。这些用品基于谐振逆变器技术的*高的效率和可靠性。专为稳定输出当前的操作,抖动的 PL 激光器与 LPS 范围在通常每秒 200 千赫经过测量,可以实现在 PL3 60 千赫以下。可以使用 PL6 或 PL5 激光泵 295 或 395

连续波 (CW) 或切碎的操作 1 千赫是可用的 LPS 范围。PL5 激光可以 (可选) 驱动的多功能 PS4P 阀控制电源提供可编程的 CW、 切碎和脉冲操作。在脉冲模式下输出激光峰值功率通常是五次留级率起到 1 kHz 和 100 微秒脉冲宽的 CW 级别。

配件
全套的配件和选项,冷却器,气体处理系统、 稳压器等。可为每个激光。

Optically pumped lasers

FIR Series (Far Infrared Lasers / Terahertz lasers)

A range of optically pumped, far infrared (FIR) lasers are available for applications that require coherent radiation in the spectral range of 40 microns to 1.22 mm, the TeraHertz (0.25 to 7.5 THz) frequency range.

FIR laser frequencies arise from rotational transitions in an excited vibrational state of a polar gas molecule at low pressure. The optically pumped FIR laser relies on the selective absorption of tunable infrared radiation to create the population inversion between rotational states and hence generate laser action. In practice, a small number of molecules are chosen to provide discrete frequencies across the entire FIR spectrum from 40μm upwards.

Output powers of 150mW and 500mW at the 118.8 μm and 184.3 micron methanol (CH3OH) lines can be guaranteed depending on the model of the Edinburgh Instruments CO2 pump laser used.

The FIR lasers are Invar bar stabilised and are available with either single or dual output. The products range from the FIR 295, FIR 395 (Twin FIR output), to the FIRL 100.

Download the FIR Series Technical Specification

Power Supplies

Conventional high voltage DC excitation is used to excite the laser discharge. Each laser is driven by one of the LPS family of new, compact (19" rack mounted) switch mode power supplies. These supplies are based on resonant inverter technology for the highest efficiencies and reliability. Designed for stable output current operation, the jitter of the PL lasers with the LPS range has been measured at typically 200kHz/sec and can achieve below 60kHz in the case of the PL3. The PL6 or a PL5 laser can be used to pump a 295 or 395

Continuous Wave (CW) or chopped operation up to 1kHz is available with the LPS range. The PL5 laser can be optionally driven with the versatile PS4P valve controlled power supply providing programmable CW, chopped and pulsed operation. In pulsed mode the laser peak output power is typically five times the CW level at repetition rates up to 1kHz and with pulse widths down to 100 microseconds.

Accessories

A full range of accessories and options, such as coolers, gas handling systems, stabilisers, etc. are available for each laser.

* 请输入您的名字,方便我们和您联系
* 请输入您的电话,方便客服及时解答您的问题
* 请输入您详情地址,方便详细提供当地的市场讯息