产品详情
查看大图

  • 产品名称：6400-TSG Total Sulfur in Fuel Gas Analyzer 燃料中总硫气体分析仪

  • 产品型号：6400-TSG
  • 产品厂商：其它品牌
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
6400-TSG Total Sulfur in Fuel Gas Analyzer 燃料中总硫气体分析仪 使用紫外荧光检测技术 6400专业的火焰燃烧器采用模块，现场证实紫外荧光技术（FCCM）检测气体流中的所有含硫化合物。该分析仪包括采样调节系统，以妥善处理，维护量极小的样本组成，其中包括燃料/可燃气体的品种
详情介绍：
6400-TSG Total Sulfur in Fuel Gas Analyzer 燃料中总硫气体分析仪
使用紫外荧光检测技术
6400专业的火焰燃烧器采用模块，现场证实紫外荧光技术（FCCM）检测气体流中的所有含硫化合物。该分析仪包括采样调节系统，以妥善处理，维护量极小的样本组成，其中包括燃料/可燃气体的品种.
优势。
范围从0-200 ppb到百分之水平 - 高达10 ppb的低检测。
连续阅读更新 - 无开关阀服务。
非消耗品传感技术。
高温火焰的FCCM确保完成硫的转化。
没有FCCM维修**两年服务的预期。
没有纯粹的氧作为一种实用工具所需的气体。
单个和多个测序流配置。
I类1区（1区）和I级2区（2区）配置。
6400天生操作理论。
目前的**硫化合物（如硫化氢，DMS的，职业导向，CH3SH，二硫化碳等）转换成二氧化硫（SO2）的**控制下，温度和流量的条件。
二氧化硫+高压¹ - 。>二氧化硫*-> +高压² **%%**.二氧化硫SO2是当暴露在紫外线光能量，hv1，它创建了一个“兴奋”的二氧化硫，二氧化硫的形式*.在高一，激发态分子的振动能级，二氧化硫*，将很快就会来的*低水平振动能量通过碰撞失去其他分子。当荧光分子返回到它的电子基态。该所发出的光，hv2，强度成正比的总硫含量的样本中发现。
当荧光分子返回到它的电子基态。该所发出的光，hv2，强度成正比的总硫含量的样本中发现。
大的型号6400 -天生火焰燃烧器采用了模块（FCCM），它提供了下一个氢火焰强度目前完全燃烧含硫化合物转化。该FCCM方法*适合的应用场合气相分析样品可以是稳态或有氢气或碳氢化合物的含量差异很大。此外，FCCM办法还规定一个真正的不断的分析提供了一个总样气中的硫含量现状的实时显示。该FCCM是生吃或未经提炼的燃料氧化能力不焦化，不载气或开关阀是必要的。
转换后的样气干燥，然后递过来的紫外荧光分析仪6400E型二氧化硫分析哪里发生，可以方便地为总硫显示。
应用领域：
炼油厂（蒸汽甲烷重整，火炬 - 第1118，传入燃料）.
天然气加工厂（硫化氢 - 酸性气体的去除）.
碳二氧化质量控制（德驱驰）。

Series 6400-TSG Total Sulfur in Fuel Gas Analyzer

Using UV-Fluorescence detection technology

Series 6400-TSG Total Sulfur Analyzer
Download the brochure

The 6400-TSG utilizes a flame combustion converter module (FCCM) with field-proven UV-Fluorescence technology to detect all sulfur compounds in a gas stream. The analyzer includes sample conditioning system to properly handle a variety of sample compositions, including fuel/combustible gases, with minimal maintenance.

Advantages
  • Ranges from 0-200 ppb to percent levels - detection as low as 10 ppb
  • Continuous reading updates - no switching valve to service
  • Non-consumable sensing technology
  • High-temperature flame of FCCM ensures complete sulfur conversion
  • No maintenance of FCCM expected in first two years of service
  • No pure oxygen required as a utility gas
  • Single and multiple sequenced stream configurations available
  • Class I Div 1 (Zone 1) and Class I Div 2 (Zone 2) configurations available
6400-TSG Theory of Operation

The undesirable sulfur compounds present (i.e. H2S, DMS, COS, CH3SH, CS2, etc) are converted into sulfur dioxide (SO2) under precisely controlled temperature and flow conditions.

SO2 + hv¹ -> SO2*-> SO2 + hv²


When SO2 is exposed to UV light energy, hv1, it creates an "excited" form of sulfur dioxide, SO2*. A molecule in a high, vibrational level of the excited state, SO2*, will quickly fall to its lowest vibrational level by losing energy to other molecules through collision. Fluorescence occurs when the molecule returns to its electronic ground state. The intensity of the emitted light, hv2, is directly proportional to the total sulfur content found in the sample.

TAI'S Model 6400-TSG utilizes a flame combustion converter module (FCCM) which provides a complete combustion conversion of the sulfur compounds present under the intensity of a hydrogen flame. The FCCM approach is best suited for gas phase applications where the analyzed sample is either steady-state or having a wide variation in the hydrogen or hydrocarbon content. Furthermore, the FCCM approach also provides a truly continuous analysis providing a real-time indication of the total sulfur content present in the sample gas. The FCCM is capable of oxidizing raw or unrefined fuels without coking and no carrier gas or switching valves are necessary.

The converted sample gas is dried, then fed to the Model 6400E UV Fluorescence Analyzer where the SO2 Analysis takes place and is conveniently displayed as Total Sulfur.

Applications Areas:

  • Refinery (Steam Methane Reformer, Flare - Rule 1118, Incoming Fuel)
  • Natural Gas Processing Plants (H2S - acid gas removal)
  • Carbon Dioxide Quality Control (CDQC)















* 请输入您的名字，方便我们和您联系
* 请输入您的电话，方便客服及时解答您的问题
* 请输入您详情地址，方便详细提供当地的市场讯息