- 备盈倍BS&B防爆**系统
- 贺尔碧格Newson Gale防爆静...
- 贺尔碧格hoerbiger防爆**系...
- 意大利Aircom爱科粉尘隔爆阀/泄...
- 法国Stif斯缇福防爆板/无焰阻火器...
- 西班牙Adix安迪克斯隔爆阀/抑制系...
- 瑞士Rico瑞科爆炸隔离阀/抑爆系统...
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除尘和防爆产品
- 美国Argus火花和金属探测以及回收...
- 美国Edwards爱德华消防报警系统
- 美国Kidde凯德厨房灭火和空气采样...
- 美国Marioff HI-FOG高压...
- 挪威纳斯克激光气体分析仪
- 德国Rembe认必泄压爆破片及隔离尘...
- 英国Amal阻火器
- 英国Marvac呼吸阀和紧急泄放阀以...
- 英国Marston防爆板和爆破片
- 美国ZOOK防爆板
- 瑞士Rico-Ventex隔爆阀
- 德国GreCon格雷康火花探测器以及...
- 德国Eltex埃尔特克斯防爆静电接地...
- 美国迪康气体检测设备
- 美国PAC实验室和在线分析仪器
- 奥德姆/安姆特仪器产品
- 美盛环境监测行业成套系统工程
- 美盛流体污染控制,过滤,分离净化产品
- 美国Norman不锈钢高压过滤器
- 美国施罗德过滤器以及过滤系统
- 韩国杜科给水设备以及泵系统
- 美国Cameron卡麦龙过程控制和阀...
- 美国BARTON测量仪器仪表
- 美国NUFLO仪表产品
- 美国clif mock采样设备和系统
- Caldon超声波技术产品
- 美国Cameron/Barton卡麦...
- 美国Pentail滨特尔油液净化设备...
- 韩国雷尊泰克REZONTECH火焰探...
- 韩国CSA Bestouch火焰探测...
- 科马特泰克色谱技术产品
- 英国爱丁堡Edinburgh ins...
- 欧美Cerex/AquaRead等进...
- 欧文凯利自控阀设备
- 德尔格Draeger**检测设备
- 美国Det-tronics火焰探测器...
- 泵阀控制
- 美国Honeywell生命**产品
- 密析尔湿度和露点仪表
- 美国TIF公司卤素检漏仪
- 美国Teledyne Analyti...
- 美国泰科SCOTT健康和**
- 日本日置HIOKI电测产品
- 英国梅克罗尼(MICRONICS)超...
- 美国AII氧分析仪
- 美国Raytek红外测温仪
- 美国Fike火灾,爆炸和卸压产品
- 美国Curtiss-Wright F...
- 美国Badger Meter 流体测...
- 美国Barton/Prime差压单元...
该系列9500氧气和二氧化碳的显示器设计提供连续,氧气和二氧化碳的无人值守监控
The Series 9500 Oxygen and Carbon Dioxide Monitor is designed to provide continuous, unattended monitoring of both oxygen and carbon dioxide.
- Features and Benefits
- System Description
- Specifications
- Options/Accessories
- Applications
- Download PDF Data Sheet
(Requires Adobe Acrobat Reader) - Contact Us
Features | Benefits |
State-of-the-Art Sensor Technology |
High Precision Measurement |
Dual Analog Outputs |
Measure Both Gases Simultaneously |
Rapid Speed of Response |
Senses Changes in Seconds |
Economically Priced | Save Thousands of Dollars vs Other Methods. |
Optional Dual Alarm Relays |
Set Threshold Values |
Minimum Maintenance |
Low Cost of Ownership |
Text Cell | Text Cell |
System Description
The focal point of the Series 9500 is its state-of-the-art sensor technology. The oxygen sensor features a patented extended life electrochemical sensor with EES (enhanced electrolyte system). EES retards passivation of the sensor anode by allowing the products of oxidation to dissolve in the electrolyte. As a result, sensor life is extended.
Learn about about sample system handling for oxygen and carbon dioxide analyzers
Alpha Omega Instruments has complemented its oxygen sensing capabilities with its next generation NDIR (non-dispersive infrared) measuring system. The carbon dioxide sensor incorporates closed-loop control for enhanced long-term calibration stability. The control signal is generated by means of an optical referencing element that monitors source intensity. This methodology, coupled with a novel source homogenizing gas sampling chamber, yields a system with greatly improved tolerance to changes in the infrared source outputs.
NOW AVAILABLE-EXPLOSION PROOF VERSIONS!
Back To Top
Specifications
OXYGEN
Ranges:
- Percent: 0-100, 0-25, 0-10, 0-5, 0-1
Error Band: ±1% of full scale
Response Time: 90% of full scale in less than 20 seconds typical
Sensor Type: Patented Electrochemical Sensor with EES
Operating Humidity Range: 1-99% RH non-condensning
Gas Sample Connections: Quick connect fittings
Sample Delivery: Pressurized sample or optional pump
Alarm Relays: Single alarm relay for oxygen (optional)
Display: 3-1/2 digit LCD for oxygen
Outputs: 4-20 mADC
CARBON DIOXIDE
Ranges:
- Percent: 0-20, 0-10, 0-5, 0-1 (special ranges consult factory)
- Trace: (parts per million) 0-5,000
Error Band: ±2.0% of full scale or ±5.0% of reading, whichever is greater. For the trace range ±5% full scale or ±95ppm whichever is greater.
Response Time: <35 seconds to 63% of step change @ a sample flow rate of 500ml/minute.
Sensor Type: Non-dispersive infrared(NDIR)
Operating Humidity Range: 5-95% RH non-condensing
Gas Sample Connections: Quick connect fittings
Sample Delivery: Pressurized sample or optional pump
Alarm Relays: Single alarm relay for carbon dioxide (optional)
Display: 3-1/2 digit LCD for carbon dioxide
Outputs: 4-20 mADC
GENERAL SPECIFICATIONS
Power Requirements: 24 VDC (supplied through an AC/DC wall mounted adapter)
Ambient Temperature Range: 40-100°F (5-38°C)
Sample Pressure Limits: <1.0 psig.
Enclosure: NEMA 1, general purpose polycarbonate enclosure suitable for bench-top use
Enclosure Dimension: 11.4" H x 6.3" W x 5.0" D
Warranty: Two years electronics, one year for sensors
Weight: <3 pounds (uncrated)
Back To Top
Options/Accessories
- Explosion Proof Enclosure
- Sample Pumps
- Sample Filters
- Alarm Relays
- Pressure Regulators
- Flow meters
Back To Top
Applications
- Food Processing
- Pharmaceutical Manufacturing
- Environmental Monitoring
- Chemical/Petrochemical
- R&D
- Laboratory Growth Chambers
- Medical Equipment
- OEM’s